User`s guide

Chapter 3: VLAN Configuration
3-22 DIGITAL MultiSwitch 700 Port Based VLAN User’s Guide
Figure 3-9 Final Walkthrough Stage
16. Use the arrow keys to highlight the Admin Status field of VLAN
ID 2, the TEST VLAN.
17. Press the SPACE bar to toggle the field to display [ENABLED].
18. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
19. Press ENTER. The message “SAVED OK” displays. The switch
activates the new VLAN.
This effectively completes the configuration of a single VLAN, a VLAN
port, and a 1Q Trunk port.
MS 700 LOCAL MANAGEMENT
Device/VLAN Configuratyion
VLAN Operation Mode: [ SECURE ]
Forward Default VLAN Out ALL Ports: [NO ]
VLAN ID
1
2
VLAN Name
DEFAULT VLAN
TEST VALN
Admin Status
[ ENABLED ]
[ ENABLED ]
VLAN ID : 1
VLAN Name : DEFAULT VLAN
SAVE
EXIT RETURN
2263n10a