User`s guide

Chapter 3: VLAN Configuration
3-20 DIGITAL MultiSwitch 700 Port Based VLAN User’s Guide
11. Use the SPACE bar to step sequentially through the previously
configured VLAN ID numbers. When the number 2 (the new VLAN
ID) is displayed, the VLAN Name field updates and displays the name
assigned to this VLAN, TEST VLAN.
12. Use the arrow keys to highlight the SAVE command at the bottom of
the screen. Press ENTER. The PVID for Port 3 on module 2 is now
configured to the TEST VLAN. The TEST VLAN is also added to the
Egress List for Port 3 on Module 2 with a frame format of Untagged.
The screen should now look like Figure 3-7.
Figure 3-7 Walkthrough Stage Two
Now that port 3 on module 2 belongs to the TEST VLAN, we will
designate one port as a 1Q Trunk port for a connection to another VLAN
aware switch. This 1Q Trunk port will carry traffic from all VLANs,
allowing VLAN frames to maintain their VLAN ID across multiple
switches.
• For the purposes of this walkthrough, port 10 on module 2 will be
configured as the trunk port.
13. Use the arrow keys to highlight the Port Mode field for port 10. Use
the SPACE bar or BACKSPACE key to step sequentially through the
possible settings of the port until 1Q TRUNK is displayed.
MS 700 LOCAL MANAGEMENT
Port Assignment
Module
2
2
2
2
2
2
2
2
2
2
2
2
Port
1
2
3
4
5
6
7
8
9
10
11
12
Port Mode
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
VLAN ID
[ 0001 ]
[ 0001 ]
[ 0002 ]
[ 0001 ]
[ 0001 ]
[ 0001 ]
[ 0001 ]
[ 0001 ]
[ 0001 ]
[ 0001 ]
[ 0001 ]
[ 0001 ]
VLAN Name
DEFAULT VLAN
DEFAULT VLAN
TEST VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
EXIT
NEXT
Module: [ 2 ]
SAVE
RETURN
2263n09