User`s guide

Quick VLAN Walkthrough
DIGITAL MultiSwitch 700 Port Based VLAN User’s Guide 3-19
Figure 3-6 Walkthrough Stage One
We can now proceed to assign a port to this new VLAN.
8. Use the arrow keys to highlight the RETURN command at the bottom
of the screen. Press ENTER. The VLAN Main Menu screen displays.
Use the arrow keys to select the PORT ASSIGNMENT menu item
and press ENTER. The Port Assignment screen displays.
9. Use the arrow keys to highlight the MODULE field number at the
bottom of the screen. Use the SPACE bar or BACKSPACE key to step
sequentially through the available module numbers. The ports and
configuration of the module will be automatically updated.
• For the purposes of this walkthrough, we have elected to configure
port 3 on module 2.
10. Use the arrow keys to highlight the VLAN ID field for the module and
port combination you wish to change.
• As this port will connect to a single workstation, and is not to be
used for switch-to-switch communications, it is not necessary to
change the PORT MODE from the default setting of HYBRID.
MS 700 LOCAL MANAGEMENT
Device/VLAN Configuration
VLAN Operation Mode: [SECURE]
Forward Default Vlan Out ALL Ports: [NO]
VLAN Name
DEFAUL VLAN
TEST VLAN
Admiin Status
[ENABLED ]
[DISABLED]
VLAN ID
1
2
VLAN ID: 2 VLAN NAME: TEST VLAN [ADD]
EXIT
RETURNSAVE
2263n08