User`s guide

Quick VLAN Walkthrough
DIGITAL MultiSwitch 700 Port Based VLAN User’s Guide 3-17
3.5.4 Deleting Forwarding List Entries
To remove a port from the currently displayed VLAN Forwarding List,
proceed as follows:
1. Enter the VLAN ID.
2. Enter the VLAN name.
3. Use the arrow keys to highlight the [ADD/DEL] field.
4. Press the SPACE bar to select [DEL]. Press ENTER.
5. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
6. Press ENTER. The message “SAVED OK” displays. The port has
been removed from the VLAN list.
3.5.5 Changing the Frame Format
To change the frame format for a port, proceed as follows:
1. Use the arrow keys to highlight the Module field. Use the SPACE bar
or BACKSPACE to step to the desired module and port combination.
Press ENTER.
2. Use the arrow keys to highlight the Port field. Step through the
available ports by pressing the SPACE bar or BACKSPACE.
3. Using the arrow keys, select the Frame Format field. Use the SPACE
bar or BACKSPACE to toggle between TAGGED or UNTAGGED.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
5. Press ENTER. The message “SAVED OK” displays.
3.6 QUICK VLAN WALKTHROUGH
The procedures below provide a short tutorial walkthrough that presents
each of the steps necessary to configure a new VLAN and assign a port to
it. You may wish to follow this walkthrough from start to finish before
attempting to configure your own VLANs.