User`s guide

Chapter 3: VLAN Configuration
3-8 DIGITAL MultiSwitch 700 Port Based VLAN User’s Guide
3.3.4 Enabling VLANs
To enable a VLAN, proceed as follows:
1. Use the arrow keys to highlight the Admin Status field of the selected
VLAN.
2. Press the SPACE bar to toggle the field to display ENABLED.
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message “SAVED OK” displays.
3.3.5 Disabling VLANs
To disable a VLAN, proceed as follows:
1. Use the arrow keys to highlight the Admin Status field of the selected
VLAN.
2. Press the SPACE bar to toggle the field to display DISABLED.
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message “SAVED OK” displays.
3.3.6 Changing the VLAN Operation Mode
To change the operational mode of the switch, proceed as follows:
1. Use the arrow keys to highlight the VLAN Operation Mode field.
2. Press the SPACE bar or BACKSPACE to toggle between SECURE
and OPEN.
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message “SAVED OK” displays.
The default VLAN cannot be disabled.