Specifications

Initializing the Access Server
6-12
R This command resets the factory-
settings and initializes the access
server. This command requires
verification. Enter YES if you want to
reset the access server to factory
settings.
-
S This command sets parameters for the
current boot cycle only
S ip=nnn.nnn.nnn.nnn
This command sets the IP address of
the access server. Use it with the
directed TFTP feature.
S gw=nnn.nnn.nnn.nnn
This command sets the IP default
gateway address of the access server.
Use it with the directed TFTP feature.
S tftp=nnn.nnn.nnn.nnn
This command sets the IP address of
the TFTP server to be used to load the
access server’s operating image. This
command also sets the directed TFTP
feature to ENABLED.
S tftp=0
This command sets the directed TFTP
feature to DISABLED.
Option Definition Associated Options