Specifications

6-11
Initializing the Access Server
B
media:name
In this command, the media part of
media:name specifies which boot
media to use.
FLA: — Use Flash RAM. For example:
B FLA:MNENG2
ETH: — Use the network to find a load
host. For example:
B ETH:MNENG2
FLA:ETH: — Use Flash RAM first, and
if that does not work, then use the
network to find a load host. For
example:
B FLA:ETH:MNENG2
B/M This command boots the maintenance
mode software for the access server.
The network load host defines this
software and is typically based on the
Ethernet MAC address of the access
server.
-
B/S This command boots the standard
system software for the access server.
The network load host defines this
software and is typically based on the
Ethernet MAC address of the access
server.
-
H This command displays the help text
that describes the interactive boot
mode commands.
-
I This command initializes the access
server using the default boot
parameters. The access server
performs all normal self-tests.
-
Option Definition Associated Options