Specifications

Initializing the Access Server
6-8
Booting from the Network
Loading the Software Image
If your network server is configured with Flash RAM, but does not have the
correct image, the access server performs a network load.
Determining Boot Protocols
During the network boot sequence, the access server searches for a load host. The
access server tries both MOP and BOOTP protocols in a factory-defined order.
The boot sequence includes a wait period after passing through all the boot
protocols. Once the access server finds a load host, it records the protocol and
load host in its permanent database. The software is then downline loaded from
the load host.
Reference
For more information about installing the software, refer to the Cabletron Network
Access Software Installation guide.