Specifications

6-7
Initializing the Access Server
Using NCP to Initialize the Access Server
NCP Initialization Commands
The following table shows the NCP commands used to initialize the access server
if you are on a load host:
The NCP LOAD and TRIGGER commands do not have any automatic warning or
delay options. However, you can warn users about an impending initialization by
using the access server BROADCAST command.
NCP Reference
For more information about NCP, refer to the documentation provided with the
host system.
NCP Initialization
Commands
Description
LOAD Ensures that the host at which you issue the command is the
node that performs the load.
TRIGGER Causes the access server to load the software image from
any host on the network.