Specifications

Managing Remote Login
24-4
Configuring a Rlogin Client
The Rlogin component implemented in the Cabletron Access Server Network
Access Software is a Rlogin client. A user can initiate a Rlogin session from an
Access Server, but a user cannot Rlogin onto an Access Server by means of a
connection over a LAN.
Follow these steps to configure a Rlogin client:
Step Action
1 Turn off the terminal’s XON/XOFF flow control. (This is not the Access Server’s
flow control.)
2 Set the port Rlogin terminal to the appropriate VTxxx value. For example:
Local> SET PORT RLOGIN TERMINAL type
If you want this change to be permanent, you can use the DEFINE/CHANGE
PORT command if you are a privileged user.
If VTxxx does not describe your terminal, then skip this step, but verify that
you have the correct terminal type specified once you have made a Rlogin
connection. If it is not set correctly, modify your environment on the remote
system.
3 Configure the remote system to accept your Rlogin request.
• If you are configuring Rlogin for DIGITAL UNIX, see Step 4 in this
table.
• If you are configuring Rlogin for OpenVMS, See Step 5 in this table.
Refer to your local system documentation for more information about
configuring remote systems.