Specifications

2-9

Management Tools

Example: Using NCP to Connect to an Access Server Remote Console Port from

a Load Host

The following example shows a connection from an OpenVMS DECnet Phase IV

load host to an access server that has the DECnet node name SHRIMP. The

maintenance password is FEDCBA. The login password is the default, ACCESS.

$ MCR NCP

NCP> CONNECT NODE SHRIMP SERVICE PASSWORD FEDCBA

Console connected (press CTRL/D when finished)

# ACCESS (not echoed)

Network Access SW Vx.x for DSxxx-xx BLxx-xx ROM Vx.x-x Uptime: 0 00:16:38

Please type HELP if you need assistance

Enter username> MANAGER

Local>

Use of SET HOST/MOP from a DECnet/OSI OpenVMS Node

MOP enables you to connect to the remote console port from an DECnet/OSI

OpenVMS node that is on the same Ethernet as the access server.

To disconnect from the access server, enter Ctrl / \ . Refer to the appropriate

DECnet/ OSI manual for information about how DECnet/OSI interprets

passwords on the SET HOST/MOP command line.