Specifications

Managing Access Server Security
23-18
Framed Session Attributes
The following table defines the framed session attributes:
Interactive Session Attributes
The following table defines the interactive session attributes:
Framed Session Attributes Definition
Framed-Protocol Type of framed protocol used for session. Used in
Access-Accept packets.
Values:
• PPP
• SLIP
Framed-IP-Address IP address to be configured for the user (in lieu of
DHCP, or similar). Used in Access-Accept packets.
Note: Two values of this address require special action:
• The value 255.255.255.255 means that the PPP
client should be allowed to negotiate the use
of its local IP address via IPCP, subject to the
access server's subnet containment rules.
• The value 255.255.255.254 means that PPP or
SLIP client should be assigned the port's PPP
address, if one exists.
Nonspecial cases would equate to:
SET PORT SLIP HOST ADDRESS ip-addr
SET PORT IPCP HOST ADDRESS ip-addr
Callback-Number Indicates the phone number to be called, after the user
has been disconnected. This attribute is formatted as a
printable ASCII string, typically containing the
characters that would follow the “ATDT” modem
command.
Interactive session
attributes
Definition
Login-IP-Host The IP address of the host system with which the user is to be
automatically connected. Used in Access-Accept packets.
Login-Service The type of service to which the user is to be automatically
connected. Used in Access-Accept packets.
Values:
• Telnet
•LAT