Specifications

Management Tools
2-6
Console Port
Displaying Port Parameters
The console port receives the access server system messages. An access server can
have only one console port at a time. The default console port number is 1. To
change the console port, use the SET/DEFINE/CHANGE CONSOLE PORT
command.
To find out the current port number for the console port, use the SHOW SERVER
command.
Reference
The console port helps with troubleshooting as described in the Cabletron
Network Access Software Problem Solving guide.
Example: SHOW SERVER Command
The following example shows how to display the current port number for the
console port. The value in for the Console Port characteristic in the display is the
current port number.
Local> SHOW SERVER
Network Access SW Vx.x for DSxxx-xx BLxx-xx ROM Vx.x-x Uptime: 0 00:16:18
Address: 08-00-2B-26-AA-99 Name: WWDOCMC Number: 0
Identification:
Circuit Timer: 80 Password Limit: 3
Console Port: 1 Prompt: Local>
Inactivity Timer: 30 Queue Limit: 100
Keepalive Timer: 20 Retransmit Limit: 8
Multicast Timer: 30 Session Limit: 64
Node Limit: 200 Software: WWENG2
Service Groups: 42, 46, 66
Enabled Characteristics:
Announcements, Broadcast, Dump, Lock