Specifications

Managing Dial Services
22-12
For a detailed explanation of command keywords used to mange dialer services,
see the Command Definitions section in Chapter 2.
Example: Change Dialer Name
The following example uses many of the keyword options in the command line:
Local> CHANGE DIALER on_the_road PORT 4-9 IDENT "Dial-back"
Local> CHANGE DIALER on_the_road NUMBER "*" MODE *
Dialer Service Characteristics
The following table describes the dialer service characteristics:
Characteristic Description Comments
IDENTIFICATION Allows an identifying string to be
associated with a given service.
Maximum length = 40
characters
CONNECTIONS Specifies whether a user may connect
to the current dial service.
Variables:
ENABLED/DISABLED
PORTS One or more physical ports that are
to offer this dial service.
-
NUMBER Indicates the allowable phone
number(s) for use with this service.
Maximum length = 48
characters
Variables: "*"/ONLY
Default = "*"
• “*” — Means users may
use any number within
their security
constraints, and are
prompted to enter a
phone number when
initiating a dialer
session.
• ONLY — Designates the
sole phone number that
may be dialed using this
service.