Specifications

22-11
Managing Dial Services
SHOW DIALER STATUS Display Fields
The following table lists values for the status field in the SHOW DIALER display:
Displaying Dialer Counters
Use the SHOW DIALER service-name COUNTERS command to display the
counters for a dialer service.
Example: Show Dialer Counters
The following example shows the dialer service counters display for the dialer
service AT_TRADESHOW:
Local> SHOW DIALER AT_TRADESHOW COUNTERS
Dial Service: AT_TRADESHOW
Seconds Since Zeroed: 1989692 Failures: 17
Connections Attempted: 113 Busy: 10
Connections Completed: 96 No Answer: 0
No Dial Tone: 0 No Response: 0
No Carrier: 0 Authentication: 7
Unknown: 0
Local>
Modifying the Dialer Service
Use the SET/DEFINE/CHANGE DIALER SERVICE dialer-service-name
command to define the dialer service. The dialer-service-name characteristic is a
string of 1 to 16 characters.
The dialer service name must be unique to the server. Before you create a new
dialer service, use the SHOW DIALER SERVICE command to verify that the new
name does not conflict with that of an existing dialer service.
Status Meaning
Initializing Sending dialer command and authorization strings.
Dialing Sending the phone number string.
Waiting Waiting for the expected response from mode.
Connected Dialer call completed, port is in use.
Available Dialer is not in use.