Specifications

22-9
Managing Dial Services
Defining the Dialer Service
Steps
After you define the dialer script and assign the dialer script to a port, define the
dialer service. A dial service is used to establish a dial-back session. Do the
following:
Showing the Current Dialer Service Characteristics
Use the SHOW/LIST/MONITOR DIALER SERVICE service-name
CHARACTERISTICS command to display dialer service characteristics. These
commands are similar to the SHOW SERVICES LOCAL family of commands in
usage and syntax.
The examples in this section show instances of using the SHOW command only.
The use of the LIST and MONITOR commands is implied, since these commands
produce similar results in the screen display. They differ in the effect that they
have on storage of data in VRAM and NVRAM.
Reference
For more information on command line syntax, see the Commands to Display
and Change Configuration Settings section in Chapter 1.
Step Action
1 Display information (characteristics, status, and counters) about currently
configured dialer services and system status.
2 Define or modify the dialer service using the SET/DEFINE/CHANGE DIAL
SCRIPT SERVICE command.