Specifications

21-19
Managing IPX
connection. Refer to the remote node access software installation guide for
additional information.
• Use local Novell login scripts to facilitate logging in to a Novell fileserver.
• If Novell packet burst is used, specify a maximum of 3 for PB BUFFERS in
NET.CFG. Using PB BUFFERS > 3 may cause access server buffers to be
depleted for PPP at the port causing poor performance. In some cases, it may
be better to disable packet burst by defining PB BUFFERS=0 in NET.CFG. You
can determine if packets are being dropped by the access server by using the
SHOW PORT n PPP COUNTERS command from a access server management
port, where n is the port with the Novell connection.