Specifications

Managing IPX
21-12
Summary of DECserver IPX Management
Commands
The following are the network access server commands you can use to manage
IPX.
Port PPP IPX Commands for LCP
The following table explains the PORT PPP IPX commands for LCP.
SHOW/LIST/MONITOR
PORT n LCP
Description
CHARACTERISTICS Display the current values for the LCP characteristics.
SHOW/MONITOR
PORT n LCP
Description
COUNTERS Display the current values of the IPXCP counters.
STATUS Display the current values of the IPXCP counters and
characteristics.
CHANGE/SET/DEFINE
PORT n LCP
Description
ACFC Address and Control Field Compression for PPP
datagram.
AUTHENTICATION Password authentication is enabled.
ENABLE Enable LCP.
DISABLE Disable LCP.
MAP Specifies characters that may not be sent in the clear.
MAXFAILURE Number of times LCP sends NAK before rejecting
option.
MAXTERMINATE Number of times LCP sends terminate request
without ACK.
MRU Maximum receive units.
PASSIVE When enabled, LCP must be initiated by attached
device.
PFC Protocol Field Compression for PPP datagram.
RESTART Restart a suspended session.