Specifications

21-11
Managing IPX
Enabling PPP/PAP Password Authentication
To enable the optional PPP/PAP password authentication, use the following
commands:
Local> CHANGE SERVER LOGIN PASSWORD xxxxxx
Local> CHANGE PORT n LCP AUTHENTICATION PAP
Disabling PPP/PAP Password Authentication
To disable the optional PPP/PAP password authentication, use the following
command:
Local> CHANGE PORT n LCP AUTHENTICATION DISABLE
Passwords
Both login password authentication and PPP/PAP password authentication use
the same password. One or both can be enabled at the same time. For PAP,
verification of the password is case sensitive. If PAP is enabled, the password
must also be supported and configured using your remote node access software
on the PC.