Specifications

Management Tools
2-2
Access Server Commands
Introduction
The access server has a command line interface. You enter commands at a prompt
on a terminal attached to an access server port. The default for the prompt is:
Local>
Reference
For a complete description of command syntax and use, refer to the Cabletron
Network Access Software Command Reference guide.
Levels of Access Server Commands
The access server has four levels of commands as listed in the following table:
User Groups
For practical purposes, the access server command set syntax is divided into
command groups. These groups are:
• Command descriptions
• CLEAR/PURGE commands
Command
Level
Provides Access to
Commands to
Enable and Disable
Privileged All access server commands. SET PRIVILEGED
Nonprivileged A subset of privileged
commands.
Default
Limited view All nonprivileged commands
except those that show or list
LAT nodes, LAT services, and
various Internet databases.
SET/DEFINE/CHANGE PORT
n LIMITED VIEW ENABLED
Secure A subset of nonprivileged
commands that apply to the
current port only.
SET/DEFINE/CHANGE PORT
n SECURITY ENABLED