Specifications

20-15
Configuring and Managing Point-to-Point Protocol (PPP) Ports
Example: ATCP Status Display
The following example shows the ATCP status display on port 5:
Local> SHOW PORT 5 PPP ATCP STATUS
Port 5: Server: LAT_08002B26AA94
ATCP Status:
State: Opened
Negotiation Time: 0 00:00:10
Since Open: 0 00:08:10
Failure Reason: None
ATCP Options: Local: Remote:
Appletalk Address: 401.20 401.12
Routing Protocol: RTMP RTMP
Suppress B_Cast: Disabled Disabled
Compression: Disabled Disabled
Connect Time: Disabled Disabled
Server Info: Disabled Disabled
Default Router: 401.249 0.0
Zone Info: LKG Littleton MA
Fields in the ATCP Status Display
The following table explains the fields in the ATCP status display:
Field Description
State The ATCP state as defined in RFC 1331. The possible states are
Initial, Starting, Closed, Stopped, Closing, Stopping, Req Sent,
Ack-Rcvd, Ack-Sent, and Opened.
Negotiation Time The number of seconds required by the PPP negotiation
procedure the last time ATCP negotiated.
Since Open The number of seconds since ATCP last attempted to negotiate
IP over the link.
Failure Reason Provides a brief reason if ATCP cannot negotiate IP over the
link.
ATCP Options: Local — Refers to the access server.
Remote — Refers to the attached PPP hosts.
AppleTalk Address The access server Appletalk address and the AppleTalk address
that the access server has acquired and assigned to the attached
host.