Specifications

Configuring and Managing Point-to-Point Protocol (PPP) Ports
20-14
Displaying ATCP Status
Use the SHOW PORT n PPP ATCP STATUS command to display ATCP status.
The
This command shows the actual state of the ATCP implementation in the access
server. Because of the nature of PPP negotiations, this display can differ from the
configured characteristics shown on the SHOW PORT n PPP ATCP
CHARACTERISTICS display.
The display fields in fall into two categories:
• General ATCP status over the link (ATCP Status section)
• Status of each ATCP option (ATCP Options section)
Negotiate Address Indicates if address negotiation should take place. This
characteristic is disabled in this release.
IP Address Local — The IP address that the access server is using for itself
on the link. This value is the address used with the access
server’s own Ethernet.
Remote — The value that the access server is using to identify
the peer on the link.
Compress Header Indicates whether compression is turned on.
Compress States Indicates the maximum number of TCP/IP connections that can
be compressed at any time.
Field Description