Specifications

Managing the Access Server

18-22

Checking Port Status and Counters

Introduction

The LIST/MONITOR/SHOW PORT command displays information about one or

more ports on the access server. You can obtain characteristics, counter, status,

and summary displays for ports.

Displaying Port Characteristics

The LIST/MONITOR/SHOW PORT CHARACTERISTICS command displays the

values of the characteristics of the selected ports. The bottom of the display lists

all the enabled port characteristics. Use the characteristics display when you are

changing settings.

The port number n in the display indicates that the port device is connected to

connector JN on the hardware unit. The server name is conﬁgured with the SET/

DEFINE/CHANGE SERVER NAME command. The other values can be changed

with the SET/DEFINE/CHANGE PORT command.

Reference

Refer to Cabletron Network Access Software Command Reference guide for

information on each command.

Some access servers have Modem Control instead of Signal Control. Also, Signal

Select is not available on all access servers.

NOTE