Specifications

Managing the Access Server
18-20
Displaying Access Server Summary Information
The LIST/SHOW/MONITOR SERVER SUMMARY command displays the access
server groups you defined.
The first line displays the access server software version number and base level,
LAT software version number, ROM version number, and the time that the access
server has been running since the last downline load, expressed as days
hours:minutes:seconds.
Use this display to determine which group codes the access server recognizes
when it processes service announcement messages from other nodes on the
network. These group codes are the sum of the authorized group codes of the
ports on the access server.
Selftest Status
(continued)
2000
4000
8000
10000
20000
Selftest Status
(continued)
40000
80000
Port: 0000000000000000: This value is a hexadecimal number that
corresponds to ports 1 to 16 from left to right.
Note: If more than one bit is set in a bit map, the value shown is
the sum of the values for each bit. For example, if the Service
Status value is 18C (hexadecimal), this is the sum of 100, 80, 8, and
4.
Software Status Display shows internal information if the status displayed is other
than Normal, that is, if a fatal software error occurs. For example:
PC=01234567
SP=01234567
SR=2300
M=01234567
C=217
A status other than Normal indicates that a fatal bugcheck error
has occurred. More information is found in the Cabletron Network
Access Software Problem Solving guide.
Field Description