Specifications

18-19
Managing the Access Server
Console User Address of the node at which the Remote Console Facility (RCF) is
being used to access the access server. The access server indicates
“none available” if the RCF is not in use.
Boot Protocol This is the protocol used to downline load the software.
Selftest Status Shows internal information if the result of self-test at the most
recent access server initialization is other than:
Normal: Server: 00-00-00 Service: 00000 Port: 0000000000000000
If a nonfatal error occurs during self-test, the access server
displays information about the error. The following describes the
information that appears in the display: Selftest Status: 00-00-00:
The leftmost two numbers are always 00. The third number is a
hexadecimal representation of a bit map in which a bit set
indicates status as follows:
Bit
1
2
4
8
20
40
80
Each number represents a bit map in which a bit set indicates a
problem with the port.
Bit
1
2
4
Service:00000: This value is a hexadecimal representation of a bit
map in which a bit set indicates which service or services
contained a checksum error.
Bit
1
2
4
8
10
20
40
80
100
200
400
800
1000
Field Description