Specifications

Managing the Access Server
18-16
The first line displays the access server software version number and base level,
LAT software version number, ROM version number, and the time that the access
server has been running since the last downline load, expressed as days
hours:minutes:seconds.
Example: SHOW SERVER STATUS Display
The following example shows how to generate an access server status display:
Local> SHOW SERVER STATUS
Network Access SW Vx.x for DSxxx-xx BLxx-xx ROM x.x-x Uptime: 0 17:05:57
Address: 08-00-2B-02-F2-BB Name: T_LAT06 Number: 65535
Cur High Max
Active Ports 8 8 16 Minutes to Shutdown: N/A
Active Users: 8 8 16 Discarded Nodes: 0
Queue Entries: 0 0 100 Resource Errors: 0
Available Services: 89 92 N/A Port Framing Errors: 0
Local Services: 2 2 20 Port Parity Errors: 0
Reachable Nodes: 75 78 200 Port Overrun Errors: 0
Boot Device: Ethernet: 0
Active Circuits: 4 7 32 Primary Host: PEACH
Connected Nodes: 3 5 32 Load Address:AA-00-04-00-46-DC
Connected Sessions: 12 20 64 Dump Address: None Available
% CPU Used: 15 36 100 Console User: None Available
% Memory Used: 36 53 100 Boot Protocol: MOP
Selftest Status: Normal
Software Status: Normal
Local>
SHOW/LIST/MONITOR SERVER COUNTERS Display Fields
The following table describes the fields and column headings in the access server
status display:
Field Description
Address Address Ethernet address of the access server.
Name Name of the access server. This string can be specified by using the
SET/DEFINE/CHANGE SERVER NAME command.
Number Number of the access server. This number can be specified by
using the SET/DEFINE/CHANGE SERVER NUMBER command.