Specifications

18-13
Managing the Access Server
Send Failure Reasons Mask providing information about the type or types of
send failure encountered if the Send Failures counter is not
zero. This is a cumulative mask.The following are the bits
defined in the mask:
Bit
0
1
4
5
8
9
If a reason for send failures is heartbeat errors and the
access server characteristic HEARTBEAT is enabled for a
transceiver that supports heartbeat, you can usually expect
up to about 200 such errors daily. This number does not
indicate a network problem.
If a reason for send failures is heartbeat errors and the
transceiver being used does not support heartbeat, check to
see whether you have heartbeat enabled. The send failures
count will reflect the heartbeat errors generated from the
transceiver not responding to checks of its heartbeat
circuitry. Disable the access server characteristic
HEARTBEAT to eliminate the spurious generation of
heartbeat errors.
Receive Failures Number of packets that were received with an error
condition. For more information, refer to the Receive
Failure Reasons field. This counter should be 0 or a low
value such as 1 or 2 daily.
Receive Failure Reasons Mask providing information about the type or types of
receive failure encountered if the Receive Failures counter
is not zero. This is a cumulative mask. The following are the
bits defined in the mask:
Bit
0
1
2
Field Description