Specifications

18-11
Managing the Access Server
the node counters display descriptions in Viewing LAT Node Counters
Information in this chapter.
Displaying Information About the Access Server
Each counter has a maximum value of 4,294,967,295. If a counter reaches that
value, it latches (remains) at that value until either the counters are set to zero or
the access server is initialized.
Example: SHOW SERVER COUNTERS Display
The following example shows how to generate an access server counters display:
Local> SHOW SERVER COUNTERS
Network Access SW Vx.x for DSxxx-xx BLxx-xx ROMx.x-x Uptime: 0 17:02:20
Seconds Since Zeroed: 1183161 Frames Sent: 1 Collision: 8377
Bytes Received: 811416880 Frames Sent,2+Collisions: 16344
Bytes Sent: 141519043 Send Failures: 1
Frames Received: 8087172 Send Failure Reasons: 00000010
Frames Sent: 1572199 Receive Failures: 47
Multicast Bytes Rcv'd: 1111005 Receive Failure Reasons: 000011
Multicast Bytes Sent: 215694 Unrecognized Destination: 193760
Multicast Frames Rcv'd: 66700 Data Overrun: 0
Multicast Frames Sent: 2179 User Buffer Unavailable: 0
Frames Sent, Deferred: 96516 System Buffer Unavailable: 0
Messages Received: 1886375 Duplicates Received: 106
Messages Transmitted: 1569667 Messages Re-transmitted: 485
Solicitations Accepted: 0 Illegal Messages Rcv'd: 6
Solicitations Rejected: 0 Illegal Slots Rcv'd: 0
Multiple Node Addresses:23591 Illegal Multicasts Rcv'd: 1
Local>
SHOW/LIST/MONITOR SERVER COUNTERS Display Fields
The following table defines the fields in the SHOW/LIST/MONITOR SERVER
COUNTERS display:
Field Description
Ethernet Data Link Counters:
Seconds Since Zeroed Number of seconds since the counters were last set to zero.
Bytes Received Number of bytes contained in datagrams successfully
received by the access server, excluding Ethernet header
and CRC data.