Specifications

Configuring LPD Printers
15-8
Displaying Printer Characteristics
Use the LIST/SHOW PRINTER command to display the printer characteristics.
You can specify a printer name or display all of the configured printers.
Printer Display Example
The following shows a typical display when you enter the SHOW PRINTER ALL
command:
Local> SHOW PRINTER ALL
Printer: LPS32_PS Header Page: Enabled
Connections: Enabled Trailer Page: Optional
Flag Page Type: Postscript Auto C/R: Disabled
Identification: The PostScript Printer
Flag Page Note:
Ports: 4,5
Printer: LPS32_ASCII Header Page: Enabled
Connections: Enabled Trailer Page: Optional
Flag Page Type: ASCII Auto C/R: Disabled
Identification The ASCII Text Printer
Flag Page Note:
Ports: 6
Local>SHOW PORT
Port 3: Server: LAT_08002BB767E3
Character Size: 8 Input Speed: 9600
Flow Control: XON Output Speed: 9600
Parity: None Signal Control: Disabled
Stop Bits: Dynamic
Access: Remote Local Switch: None
Backwards Switch: None Name: PORT_3
Break: Local Session Limit: 4
Forwards Switch: None Type: Ansi
Default Protocol: LAT Default Menu: None
Dialer Script: None
Preferred Service: None
Authorized Groups: 0
(Current) Groups: 0
Enabled Characteristics:
Broadcast, Failover, Input Flow Control, Lock, Loss