Specifications

14-15
Configuring and Managing Telnet Servers
Managing Your Access Server As a Telnet Listener
Node
Introduction
This section contains the procedures to display and remove Telnet listeners.
Displaying Telnet Listeners
The SHOW/LIST/MONITOR TELNET LISTENER command displays the Telnet
listener characteristics. The ALL characteristic displays all the Telnet listeners.
You can specify a specific Telnet listener by its TCP port number.
Example: SHOW TELNET LISTENER Display
The following example shows how to display the Telnet listener characteristics on
TCP port 2010:
Local> SHOW TELNET LISTENER 2010
Listener TCP-port: 2010
Identification: Printer
Ports: 6,8
Connections: Enabled
The first line displays the TCP port number; the second line displays the
identification string; the third line displays the listener’s access server port
numbers; the last line displays whether connections to the listener are enabled or
disabled.
Displaying Telnet Server Characteristics
The SHOW/LIST/MONITOR PORT TELNET SERVER CHARACTERISTICS
command displays the Telnet server characteristics.