Specifications

14-11
Configuring and Managing Telnet Servers
Configuring a Telnet Listener
Introduction
Perform the following steps to assign a Telnet listener to one or more devices
attached to access server ports:
Step Action
1 Assign a TCP port to the access server port. The access server uses 23, and
2001 to 2032 as TCP port numbers. The TCP port number is the number
that users on the TCP/IP network use to connect to the device on the
access server port.
2 Determine which access server port or ports are to be assigned to the Telnet
listener.
3 Provide an identification string that helps users recognize and use the
resource. It can be up to 40 characters in length. The factory-set default is
no identification string.
4 Enable the listener to receive connections. The factory-set default for
CONNECTIONS is DISABLED.
5 Specify the individual access server session characteristics, as described in
the Configuring Telnet Server Session Characteristics section in this
chapter.