Specifications

14-3
Configuring and Managing Telnet Servers
Sample Device Configurations
Introduction
This section provides examples of configuring the following types of devices for
access through a Telnet listener:
• A printer
• A computer
• A modem
You must configure the device and port characteristics as described in Chapter 9
before performing the procedures described in this chapter.
The examples in this section do not include the various Telnet server
characteristics.
Refer to Configuring Telnet Server Session Characteristics in this chapter to set up
the Telnet server characteristics.
The following lists the variables in this chapter that you should substitute with
the appropriate values:
• Access server port number
• Flow control type (printer only)
• Telnet listener-identifier (Must be 23 or between 2001 to 2032, inclusive.)
• Identification string (up to 40 characters)
Configuring a Printer for Access Through a Telnet Listener
For systems that need to access the printer, you must supply the system managers
with the TCP port number. The section Configuring a Remote Print Queue in this
chapter provides an example of setting up a remote print queue on an ULTRIX or
UNIX system.