Specifications

Configuring and Managing LAT Services
13-18
Displaying Services Characteristics
The LIST/SHOW/MONITOR SERVICES CHARACTERISTICS command
generates a display of information on values that you can modify with the SET/
DEFINE/CHANGE SERVICE command. With the LIST command, the
characteristics display is the default display for the SERVICES and the SERVICES
LOCAL entity specifications.
Example: SHOW SERVICE CHARACTERISTICS Display
The following example below shows how to generate a service characteristics
display for the service named PRINTER:
Local> SHOW SERVICE PRINTER CHARACTERISTICS
Service: PRINTER
Identification: Printer Ports to PEACH
Ports: 1-3, 5, 7
Rating: 255
Enabled Characteristics:
Connections, Password, Queuing
Local>
SHOW/LIST/MONITOR SERVICE CHARACTERISTICS Display Fields
The following table describes the fields displayed in the service characteristics
display:
Field Description
Service Name that identifies the network service.
Identification Service identification string. This string is usually a short
description of the service or of how to use it.
The following fields are displayed only for services offered by the access server (local
services):
Ports Numbers of the ports at which the local service is offered.
Rating Rating at which the access server offers this service. If any ports
that offer the service are available, the rating is proportional to the
number of available ports. If no ports are available that offer the
service and if queuing is enabled for the service, the rating is
proportional to the number of unused positions in the connection
queue.
Enabled
characteristics
Characteristics that can be enabled with the CHANGE SERVICE
command. The access server displays only those characteristics that
are enabled for local services.