Specifications

13-13

Conﬁguring and Managing LAT Services

Conﬁguring a Printer with Unannounced Availability

Introduction

This section describes how to conﬁgure a printer with unannounced availability.

The only users that know about the device’s availability are those users that you

tell about the device. By deﬁning a port name and not a service name, you can

conﬁgure a device on the access server for access by users on a LAT network.

Conﬁguring a Printer with Unannounced Availability

The example in this topic shows a sample conﬁguration of a printer with

unannounced availability on a LAT network. You must conﬁgure the device and

port characteristics, as described in Chapter 9, before performing this procedure.

The following are variables in the example that you should substitute with the

appropriate values:

• Access server port number

• Authorized and service groups

• Port name

You should change the port name to a descriptive term. This term should

describe the resource provided (for example, printer or ﬁle transfer). The port

name must be unique on the access server and follow the naming conventions

described in the Cabletron Network Access Software Command Reference guide.

Substitute MODEM CONTROL for SIGNAL CONTROL if your access server

supports MODEM CONTROL.

Reference

For a description of each command, refer to theCabletron Network Access Software

Command Reference guide.

Not all commands can be combined on one line.

NOTE