Specifications

Configuring and Managing Interactive Devices
12-46
SHOW/MONITOR SESSIONS Display Fields
The following table describes the information in the SHOW/MONITOR
SESSIONS display:
Displaying Session Characteristics
You can display the characteristics of any current LAT or Telnet session.
Example: SHOW PORT SESSIONS CHARACTERISTICS Display for a LAT
Session
The following example displays the characteristics of LAT session 1 on port 4:
Local> SHOW PORT 4 SESSIONS 1 CHARACTERISTICS
Port 4, Session 1, Protocol LAT
Transparency Mode: Interactive
Field Description
Session n Number of the session.
First Column Status of a session, which can be one of the following:
Connected Port is connected to the service.
Connecting Port is attempting to connect to a service
Disconnected Session was terminated while dormant.
Disconnecting Access serve is disconnecting the port from the
service.
Signal Wait The port failed to assert the DSR signal during a
signal check controlled connection attempt.
Queued at n Position in the connection queue of the
connection request for a service. The request at
position 1 is the next one to be dequeued and
connected.
Second column Displays which protocol (LAT or Telnet) the session is using.
Third Column Name of the LAT service or Internet host associated with the
session, or SLIP for SLIP sessions. If the name of the LAT service
differs from the name of the LAT service node supplying the service,
the display includes the name of the LAT service node within
parentheses. For a remote-access connection to the port, the LAT
service name is the LAT service sought by the requesting node and
the name within parentheses is the requesting LAT service node.