Specifications

Configuring and Managing Interactive Devices
12-40
SHOW/LIST/MONITOR USERS Display Headings
The following table provides an explanation of the information in the display in
the previous example:
Specifying User Groups
Nonprivileged users can choose the groups they require for their ports by using
the SET PORT GROUPS command. Users must choose from the groups you
authorized for their ports. The SET PORT GROUPS command limits user access
to those services made available by the groups specified with the command. The
command serves to shorten the node and service displays.
Heading Description
Port Number Number of the port.
Username Any user name or the name of the port established by the PORT
NAME characteristic.
Note: Any port having the user name “(Remote)” designates a
remote-access session in progress.
Status Status of the port, which can be one of the following:
Connected Port is connected to a service.
Connecting Port is attempting to connect to a service.
Disconnected Session was terminated while dormant.
Disconnecting Session is disconnecting from a service.
Signal Wait The port failed to assert the DSR signal
during a signal check controlled connection
attempt.
Idle Port is not is use.
Local Mode Port is logged into the access server and is
in local mode.
Locked The user has entered the LOCK command
to LOCK the port.
Service Name of the user’s current session.