Specifications

12-29
Configuring and Managing Interactive Devices
Service Permissions Access
The following table shows the type of service permissions a user can have. A user
can have more than one type of service permission. The user can also have more
than one type of permission assigned at a time. There is no limit to the total
number of permissions a user can have.
User Account Command Parameters
The commands in the following table allow the security manager to manage a
small local database to be used for authentication and authorization. The table
shows the command keywords associated with user account variables.
Local User may utilize the access server commands.
None The configuration value of the port access parameter or realm-wide access
parameter determines user access to the realm.
Service Type User Access
Telnet The user may make Telnet connections on the current session.
LAT The user may make LAT connections on the current session.
Dial-Out The user may invoke a dial-out connection on the current session.
Dial-Back The user may invoke a dial-back on the current session.
SLIP The user may invoke a SLIP connection on the current session.
PPP The user may invoke a PPP connection on the current session.
Privileged-User The user has a privilege level of PRIVILEGED.
Command Clause Description Variables Comments
CLEAR/PURGE Allows local data base
entries to be deleted.
SET/DEFINE/
CHANGE
Permits entry
addition and
modification.
ENABLED/
DISABLED
Service Type Description