Specifications

12-19
Configuring and Managing Interactive Devices
Telnet Client Session Characteristics Predefined for Each Profile
The following table lists the Telnet client session characteristics that are
predefined for each profile. Enabling a profile automatically sets all the
characteristics to the value specified by the profile, except those listed as “use
current value.” Those characteristics keep their existing value.
1
If ECHO is in local mode, the ECHO characteristics are suppressed, and
characters are not echoed.
Profiles
Session Characteristics Character Binary
ECHO Remote Use current access
server value 1
BINARY Disabled Duplex
CHARACTER SIZE (Transmit) Use current value 8
CHARACTER SIZE (Receive) Use current value 8
SIGNAL REQUEST Enabled Disabled
AO, IP, AYT, SYNCH, EOR, BRK Use current value Not used
TOGGLE ECHO Not used Not used
QUOTE Use current value Not used
AUTOFLUSH Use current value Not used
AUTOSYNC Use current value Not used
NEWLINE FROM TERMINAL Use current value Not used
NEWLINE TO TERMINAL Use current value Not used
NEWLINE FROM HOST Use current value Not used
NEWLINE TO HOST Use current value Not used
FLOW CONTROL Enabled Disabled
MESSAGE VERIFICATION Enabled Disabled
SWITCH CHARACTERS Enabled Disabled
TERMINAL TYPE Use current access
server value
Use current access
server value