Specifications

Conﬁguring and Managing Interactive Devices

12-12

Enable DSRLOGOUT or LONGBREAK LOGOUT (see Specifying DSRLOGOUT

and Specifying LONGBREAK LOGOUT in Chapter 9) if you wish the access

server to log out the port when the device is turned off. Note that the access

server, device, and device cable must support the DSR signal if you use

DSRLOGOUT.

Reference

For a description of the default protocol characteristic, refer to Specifying the

Default Protocol in this chapter.

For a description of the Telnet client proﬁles, refer to Specifying the Telnet Client

Session Proﬁle in this chapter.