Specifications

11-13
Configuring Modem Signals
Specifying DIALUP
Description
The DIALUP characteristic is used to notify LAT service nodes that a port user
connected to the service through a dial-in modem. The service node can use this
information to implement system security. With DIALUP enabled, the access
server sends DIALUP notification to service nodes. With DIALUP disabled (the
default), the access server does not notify the service nodes. If you do not enable
DIALUP, the service node could treat the user’s service sessions as local
connections at the service node itself. Ask the network manager and the service
node system manager if they require this notification when there are dial-in
modems at access server ports. The DIALUP characteristic is not used for
resources on the TCP/IP network.