Specifications

9-13
Managing AppleTalk
Displaying AppleTalk ARP Entries
Introduction
When an attached host sends a message to an unknown AppleTalk node on the
access server network, the access server creates an entry in the AppleTalk ARP
cache and transmits an ARP request for the node’s data link address. At this time,
the access server does not know the address for the desired node. When it
receives a reply, it fills in the node’s corresponding Ethernet address.
Command
Use the SHOW/MONITOR APPLETALK ARP ENTRIES command to display
entries that the access server creates in the AppleTalk ARP cache.
Displaying AppleTalk ARP Entries Example
The following example shows how to display the entries in the AppleTalk ARP
cache:
Local> SHOW APPLETALK ARP ENTRIES
AppleTalk ARP Entries Server:LAT_08002B26AE00
ATalk Address Ethernet Address Status Interface
12345.132 08-00-2B-26-AE-00 Local Ethernet
12345.28 08-00-2B-26-AE-00 Acquired Ethernet
12346.7 08-00-2B-26-AE-00 Local Asynch3
12347.18 08-00-2B-26-AE-00 Local Asynch12
12347.2 <resolving> Remote Ethernet
12344.3 AA-00-04-11-21-10 Remote Ethernet
Fields in the AppleTalk ARP Display
The following table describes the fields in the AppleTalk ARP Entries display:
Field Value Description
ATalk Address The AppleTalk address of a node.
Ethernet Address The corresponding Ethernet address for the AppleTalk node.
Status The status of the AppleTalk ARP Entry.