Specifications

Managing AppleTalk
9-10
Up AppleTalk is fully operational.
Address The AppleTalk address of the access server, learned from
the EtherTalk network at initialization. Its value is 0.0
until the Learning state.
Network The AppleTalk network range the access server learned
at initialization. If no AppleTalk router is on the access
server’s network, the value is 1-65534. The value is 0-0
until the Learning state.
Name The full AppleTalk name of the access server consists of:
object:type@zone.
Object The unique name of the access server (for example, LAT
08002B24F24F). You can configure this parameter with
the SET/DEFINE/CHANGE SERVER NAME
command.
Type The type of device (for example, DECserver 700-08). This
parameter cannot be configured.
Zone The zone to which the access server belongs. This is a
learned parameter and cannot be configured.
Cache The current address cache size.
Attached Hosts The number of AppleTalk hosts attached to the access
server via asynchronous lines.
Last Error The last AppleTalk error reported.
Field Value Description