Specifications

9-9
Managing AppleTalk
Displaying AppleTalk Status
Command
Use the SHOW/MONITOR APPLETALK STATUS command to display the
AppleTalk status on the access server. The command is nonprivileged.
Displaying AppleTalk Status Example
The following example shows how to display the AppleTalk status on an access
server:
Local> SHOW APPLETALK STATUS
AppleTalk Status Server: LAT_08002B24F24F
State: Up
Address: 401.78
Network: 401-401
Name:
Object: LAT_08002B24F24F
Type: Access Server 316
Zone: LKG Littleton MA
Cache: 2
Attached Hosts: 0
Last Error: <no error>
Fields in the AppleTalk Status Display
The following table describes the fields that appear in the AppleTalk Status
display:
Field Value Description
State The status of the access server AppleTalk
implementation.
Off AppleTalk is not operating.
Acquiring The access server is acquiring an AppleTalk address.
Learning The access server is learning its AppleTalk zone.
Reacquiring The access server is getting itself a new AppleTalk
address.
Registering Registering The access server is registering its name.