Specifications

TCP/IP Network Characteristics
8-24
Setting Up IP Configuration Learning
Do the following to set up your access server to learn IP configuration
information from a BOOTP server on the network:
Step Action
1 Set up the BOOTP server:
a. Add an entry for the access server’s Ethernet address.
b. Associate the Ethernet address with an IP address.
c. Optionally, associate the Ethernet address with a subnet
mask and default gateway.
Reference: The CNAS installation instructions provide details about
configuring a BOOTP server.
2 Ensure that the access server does not have an IP address stored in
NVRAM. Use the following command:
Local> LIST INTERNET
If the display shows an Internet address, clear it using the following
command:
Local> DEFINE INTERNET ADDRESS NONE
3 Ensure that the Internet characteristic is enabled. Use the following
command:
Local> LIST INTERNET
If the Internet characteristic is not enabled, enable it using the
following command:
Local> DEFINE INTERNET ENABLED