Specifications

Configuring LAT Characteristics
7-10
ACCESS SERVER NAME Characteristic
Introduction
The SERVER NAME characteristic is a string of 1 to 16 characters. This name must
be unique on the LAT network. When the access server offers a service, it
periodically multicasts the name over the local area network.
Default Access Server Name
The default access server name is LAT_ethernet-address. This value is the 12-digit
hexadecimal Ethernet address of the access server. This address does not contain
hyphens.
Changing the ACCESS SERVER NAME
Use the DEFINE/SET/CHANGE SERVER NAME command to change this
characteristic. The following example shows how to change the access server
name to “Printing”:
Local> CHANGE SERVER NAME PRINTING