Specifications

SET/DEFINE/CHANGE Commands
4-10
DIALER SCRIPT [NAME]
(privileged)
Syntax
Description
This privileged command is used to define a modem script/type and its
characteristics. The script name may be a maximum of 16 characters. Parameters
define the character strings that make up various modem commands. The
functions and default values of each string are shown in the table below. Each
associated string can be up to 40 characters in length.
The size of a modem dialer script string is restricted by the amount of remaining
unallocated NVRAM for the modem pool (total of 2K bytes for 8- and 16-port
servers, and 4Kbytes for 32-port servers) and by the command line restrictions.
The script name may be a maximum of 16 characters.
String Type Default Value Usage
COMMAND "AT" Appended to all other command
strings.
INIT None Before initiating an outbound
connection.
PREFIX "DT" Before digits of phone number.
CONNECTED "Connect" Verifies successful connection.
RESET "H0Z"
(Second character is
zero.)
After session is disconnected.