Specifications

4-5
SET/DEFINE/CHANGE Commands
COMMAND GROUP
(privileged)
Syntax
Description
This command creates a command group with a name and an associated port list.
A command group can be invoked with the DO command, provided you have
privilege access or are logged in to one of the ports in the associated port list.
If the command group already exists, this command can change the port list
associated with it, or renumber the lines in it. The SET/DEFINE/CHANGE
COMMAND GROUP LINE command is used to fill in the contents of the
command group.
Keywords
command_group
Specifies the name for this command group and appears as the parameter in a DO
command. The maximum length of a command group name is 16 characters.
port-list
Specifies one or more physical ports that have access to this command group.
ALL
Specifies all of the physical ports. The remote management console is not
included.
CONSOLE
Specifies the remote management console, available with either Telnet or MOP.
ENABLED/DISABLED
If ENABLED, the ports specified are added to the list of ports allowed to use this
command group. If DISABLED, the ports specified are removed from the list of
ports allowed to use this command group. If DISABLED or ENABLED are not
specified, the list of ports specified becomes the list of ports allowed to use the
command group.