Specifications

SET/DEFINE/CHANGE Commands
4-4
Keywords
ENABLED/DISABLED
If ENABLED, the access server provides AppleTalk functionality.
If DISABLED, the access server does not provide AppleTalk functionality. To
become effective, the privileged user must DEFINE the characteristic DISABLED
and then reinitialize the access server. If you enter any subsequent AppleTalk
commands, you receive an error message. If AppleTalk has been disabled, no
memory is allocated. In addition, the access server rejects all SNMP queries for
AppleTalk information and transmits a “No Such Name” error message.
APPLETALK [ADDRESS] CACHE
(privileged)
Syntax
Description
This privileged command specifies the maximum number of AppleTalk addresses
the access server should acquire for hosts attaching through the access server
asynchronous lines.
Keywords
n
The number of addresses the access server should preacquire. The supported
range of n is from 1 to the number of asynchronous ports. The default is the
number of asynchronous ports divided by 8.
This characteristic can be modified in NVRAM only. There is no corresponding
SET or CHANGE command.
NOTE