Specifications

Command Descriptions
2-30
Example: TEST PORT
Local> TEST PORT 3 COUNT 90 WIDTH 60 LOOP INTERNAL
This command directs the access server to loop internally ninety 60-character
lines to port 3.
TEST SERVICE
(privileged)
Syntax
Description
This privileged command tests the end-to-end access servers over the LAT
network. The test is performed between the access server and a service node.
When the test is completed, the access server displays a report of the test results.
Keywords
service-name
Specifies the name of the service to be tested.
NODE node-name
Specifies the service node to be tested. (The default is the highest rated node that
supports the specified service.)
DESTINATION port-name
Specifies which port offering the service is to be tested.
COUNT n
Specifies the number of test buffers to be sent. (The default is 1.)
WIDTH n
Specifies the number of characters per buffer. (The range is 1 to 180; the default is
80.)