Specifications

2-21
Command Descriptions
ALL
Is a privileged option that logs out all ports except the port where the command is
entered.
CONSOLE
Is a privileged option that logs out the port being used as a remote management
console port.
port-list
Is a privileged option specifying the port(s) to be logged out. (The default is your
own port.) If your port is not specified in the list, it will not be logged out. For
more information on specifying port-list, refer to Chapter 1 for examples and
conventions.
port-number
Is a privileged option specifying the port you want logged out. (The default is
your own port.)
FACTORY
Is a privileged option that resets the port characteristics to their factory defaults.
MODEM [RESET]
Asserts a reset signal to the DECserver 900MC modem port. If you issue this
command on a platform other than a DECserver 900MC platform, the software
performs a simple logout.
Examples: LOGOUT
Local> LOGOUT
Local> LOGOUT PORT 5
The first command logs out the port where the command is entered and
disconnects all sessions on that port. The second command disconnects all
sessions and logs out of port 5.
LOOP
For information on this command, refer to the TEST LOOP command.
MONITOR
For information on this command, refer to the SHOW/MONITOR/LIST and
SHOW/MONITOR commands in Chapter 5.